聚四氟乙烯模压棒 产品类别：聚四氟乙烯悬浮树脂 产品简述：直径1-5mm的聚四氟乙烯模压棒是选用聚四氟乙烯树脂经糊膏挤压加工成;直径6-200mm的聚四氟乙烯模压棒选用悬浮聚四氟乙烯树脂经柱塞加工制成直径200mm以上的棒经模压加工制成。

特征 Features

直径1-5mm的聚四氟乙烯模压棒是选用聚四氟乙烯树脂经糊膏挤压加工成;直径6-200mm的棒选用悬浮聚四氟乙烯树脂经柱塞加工制成直径200mm以上的棒经模压加工制成。

Diameter 1-5mm rods are made of polytetraflu resin by paste extrusion processing: Diameter 6-200mm rod selection suspension PTFE resin made by plunger processing Diameter more than 200mm rods by molding production

型号及规格 Types and Specifications

注:当棒直径大于16mm时,仅测试表观密度

Note: When the diameter of rod is larger than 1 6mm, only test apparent density

主要技术指标 Main Properties:

用途App| ications

化工方面:能用作防腐资料,可制造各种防腐蚀零部件,如管子、阀门、泵及管件接头等。化工设备方面,可制作反应器、蒸馏塔及防腐设备的衬里和涂层。机械方面:可用作自润滑轴承、活塞环、油封及密封圈等。自润滑性可减少机件磨损和发热,降低动力消耗。电子电器方面:主要用于制造各种电线电缆、电池电极、电池隔膜、印刷电路板等。

Chemical: can be used as anti-corrosion materials, can manufacture a variety of anti-corrosion parts, su

as pipes, valves, pumps and fittings joints. Chemical equipment, can be produced reactor, distillation column

anti-corrosion equipment lining and coating

Mechanical: can be used as self-lubricating bearings, piston rings oil seals and seals. Self-lubrication can

duce wear and heat and reduce power consur

Electronic and electric

pects:mainly used in the manufacture of various wire and cable, battery elec

trodes, battery separator, printed circuit boards

 

本文由聚四氟乙烯模压棒生产厂家扬中市亚达橡塑制品有限公司于2018-11-8 17:30:50整理发布。
转载请注明出处：http://www.yada-cn.com/product/8.html。

  上一篇：聚四氟乙烯挤出棒

  下一篇：聚四氟乙烯车削膜